0

Top 10 Ways to Destroy Earth

environment environment - 2 years ago

10.Total existence failure






You will need: nothing



Method: No method. Simply sit back and twiddle your thumbs as, completely by chance, all 200,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000 atoms making up the planet Earth suddenly, simultaneously and spontaneously cease to exist. Note: the odds against this actually ever occurring are considerably greater than a googolplex to one. Failing this, some kind of arcane (read: scientifically laughable) probability-manipulation device may be employed.



Utter, utter rubbish.



9.Gobbled up by strangelets






You will need: a stable strangelet



Method: Hijack control of the Relativistic Heavy Ion Collider in Brookhaven National Laboratory, Long Island, New York. Use the RHIC to create and maintain a stable strangelet. Keep it stable for as long as it takes to absorb the entire Earth into a mass of strange quarks. Keeping the strangelet stable is incredibly difficult once it has absorbed the stabilizing machinery, but creative solutions may be possible.



A while back, there was some media hoo-hah about the possibility of this actually happening at the RHIC, but in actuality the chances of a stable strangelet forming are pretty much zero.



Earth's final resting place: a huge glob of strange matter.



8.Sucked into a microscopic black hole






You will need: a microscopic black hole. Note that black holes are not eternal, they evaporate due to Hawking radiation. For your average black hole this takes an unimaginable amount of time, but for really small ones it could happen almost instantaneously, as evaporation time is dependent on mass. Therefore you microscopic black hole must have greater than a certain threshold mass, roughly equal to the mass of Mount Everest. Creating a microscopic black hole is tricky, since one needs a reasonable amount of neutronium, but may possibly be achievable by jamming large numbers of atomic nuclei together until they stick. This is left as an exercise to the reader.



Method: simply place your black hole on the surface of the Earth and wait. Black holes are of such high density that they pass through ordinary matter like a stone through the air. The black hole will plummet through the ground, eating its way to the center of the Earth and all the way through to the other side: then, it'll oscillate back, over and over like a matter-absorbing pendulum. Eventually it will come to rest at the core, having absorbed enough matter to slow it down. Then you just need to wait, while it sits and consumes matter until the whole Earth is gone.



Highly, highly unlikely. But not impossible.



Earth's final resting place: a singularity of almost zero size, which will then proceed to happily orbit the Sun as normal.



Source: "The Dark Side Of The Sun," by Terry Pratchett. It is true that the microscopic black hole idea is an age-old science fiction mainstay which predates Pratchett by a long time, he was my original source for the idea, so that's what I'm putting.



7.Blown up by matter/antimatter reaction






You will need: 2,500,000,000,000 tons of antimatter



Antimatter - the most explosive substance possible - can be manufactured in small quantities using any large particle accelerator, but this will take some considerable time to produce the required amounts. If you can create the appropriate machinery, it may be possible - and much easier - simply to "flip" 2.5 trillion tons of matter through a fourth dimension, turning it all to antimatter at once.



Method: This method involves detonating a bomb so big that it blasts the Earth to pieces.



How hard is that?



The gravitational binding energy of a planet of mass M and radius R is - if you do the lengthy calculations - given by the formula E=(3/5)GM^2/R. For Earth, that works out to roughly 224,000,000,000,000,000,000,000,000,000,000 Joules. The Sun takes nearly a WEEK to output that much energy. Think about THAT.



To liberate that much energy requires the complete annihilation of around 2,500,000,000,000 tonnes of antimatter. That's assuming zero energy loss to heat and radiation, which is unlikely to be the case in reality: You'll probably need to up the dose by at least a factor of ten. Once you've generated your antimatter, probably in space, just launch it en masse towards Earth. The resulting release of energy (obeying Einstein's famous mass-energy equation, E=mc^2) should be sufficient to split the Earth into a thousand pieces.



Earth's final resting place: A second asteroid belt around the Sun.



Earliest feasible completion date: AD 2500. Of course, if it does prove possible to manufacture antimatter in the sufficiently large quantities you require - which is not necessarily the case - then smaller antimatter bombs will be around long before then.



6.Destroyed by vacuum energy detonation






You will need: a light bulb



Method: This is a fun one. Contemporary scientific theories tell us that what we may see as vacuum is only vacuum on average, and actually thriving with vast amounts of particles and antiparticles constantly appearing and then annihilating each other. It also suggests that the volume of space enclosed by a light bulb contains enough vacuum energy to boil every ocean in the world. Therefore, vacuum energy could prove to be the most abundant energy source of any kind. Which is where you come in. All you need to do is figure out how to extract this energy and harness it in some kind of power plant - this can easily be done without arousing too much suspicion - then surreptitiously allow the reaction to run out of control. The resulting release of energy would easily be enough to annihilate all of planet Earth and probably the Sun too.



Slightly possible.



Earth's final resting place: a rapidly expanding cloud of particles of varying size.



Earliest feasible completion date: 2060 or so.



Source: "3001: The Final Odyssey," by Arthur C. Clarke



5.Sucked into a giant black hole






You will need: a black hole, extremely powerful rocket engines, and, optionally, a large rocky planetary body. The nearest black hole to our planet is 1600 light years from Earth in the direction of Sagittarius, orbiting V4641.



Method: after locating your black hole, you need get it and the Earth together. This is likely to be the most time-consuming part of this plan. There are two methods, moving Earth or moving the black hole, though for best results you'd most likely move both at once.



Very difficult, but definitely possible.



Earth's final resting place: part of the mass of the black hole.



Earliest feasible completion date: I do not expect the necessary technology to be available until AD 3000, and add at least 800 years for travel time. (That's in an external observer's frame of reference and assuming you move both the Earth and the black hole at the same time.)



Sources: "The Hitch Hiker's Guide To The Galaxy," by Douglas Adams; SPACE.com



4.Meticulously and systematically deconstructed






You will need: a powerful mass driver, or ideally lots of them; ready access to roughly 2*10^32J



Method: Basically, what we're going to do here is dig up the Earth, a big chunk at a time, and boost the whole lot of it into orbit. Yes. All six sextillion tons of it. A mass driver is a sort of oversized electromagnetic railgun, which was once proposed as a way of getting mined materials back from the Moon to Earth - basically, you just load it into the driver and fire it upwards in roughly the right direction. We'd use a particularly powerful model - big enough to hit escape velocity of 11 kilometers per second even after atmospheric considerations - and launch it all into the Sun or randomly into space.



Alternate methods for boosting the material into space include loading the extracted material into space shuttles or taking it up via space elevator. All these methods, however, require a - let me emphasize this - titanic quantity of energy to carry out. Building a Dyson sphere ain't gonna cut it here. (Note: Actually, it would. But if you have the technology to build a Dyson sphere, why are you reading this?) See No. 6 for a possible solution.



If we wanted to and were willing to devote resources to it, we could start this process RIGHT NOW. Indeed, what with all the gunk left in orbit, on the Moon and heading out into space, we already have done.



Earth's final resting place: Many tiny pieces, some dropped into the Sun, the remainder scattered across the rest of the Solar System.



Earliest feasible completion date: Ah. Yes. At a billion tons of mass driven out of the Earth's gravity well per second: 189,000,000 years.



Source: this method arose when Joe Baldwin and I knocked our heads together by accident.



3.Pulverized by impact with blunt instrument






You will need: a big heavy rock, something with a bit of a swing to it... perhaps Mars



Method: Essentially, anything can be destroyed if you hit it hard enough. ANYTHING. The concept is simple: find a really, really big asteroid or planet, accelerate it up to some dazzling speed, and smash it into Earth, preferably head-on but whatever you can manage. The result: an absolutely spectacular collision, resulting hopefully in Earth (and, most likely, our "cue ball" too) being pulverized out of existence - smashed into any number of large pieces which if the collision is hard enough should have enough energy to overcome their mutual gravity and drift away forever, never to coagulate back into a planet again.



A brief analysis of the size of the object required can be found here. Falling at the minimal impact velocity of 11 kilometers per second and assuming zero energy loss to heat and other energy forms, the cue ball would have to have roughly 60% of the mass of the Earth. Mars, the next planet out, "weighs" in at about 11% of Earth's mass, while Venus, the next planet in and also the nearest to Earth, has about 81%. Assuming that we would fire our cue ball into Earth at much greater than 11km/s (I'm thinking more like 50km/s), either of these would make great possibilities.



Obviously a smaller rock would do the job, you just need to fire it faster. A 10,000,000,000,000-tonne asteroid at 90% of light speed would do just as well. See the Guide to moving Earth for useful information on maneuvering big hunks of rock across interplanetary distances.



Pretty plausible.



Earth's final resting place: a variety of roughly Moon-sized chunks of rock, scattered haphazardly across the greater Solar System.



Earliest feasible completion date: AD 2500, maybe?



Source: This method suggested by Andy Kirkpatrick 



2.Eaten by von Neumann machines






You will need: a single von Neumann machine



Method: A von Neumann machine is any device that is capable of creating an exact copy of itself given nothing but the necessary raw materials. Create one of these that subsists almost entirely on iron, magnesium, aluminum and silicon, the major elements found in Earth's mantle and core. It doesn't matter how big it is as long as it can reproduce itself exactly in any period of time. Release it into the ground under the Earth's crust and allow it to fend for itself. Watch and wait as it creates a second von Neumann machine, then they create two more, then they create four more. As the population of machines doubles repeatedly, the planet Earth will, terrifyingly soon, be entirely eaten up and turned into a swarm of potentially sextillions of machines. Technically your objective would now be complete - no more Earth - but if you want to be thorough then you can command your VNMs to hurl themselves, along with any remaining trace elements, into the Sun. This hurling would have to be achieved using rocket propulsion of some sort, so be sure to include this in your design.



So crazy it might just work.



Earth's final resting place: the bodies of the VNMs themselves, then a small lump of iron sinking into the Sun.



Earliest feasible completion date: Potentially 2045-2050, or even earlier.



Source: "2010: Odyssey Two," by Arthur C. Clarke  



1.Hurled into the Sun






You will need: Earthmoving equipment



Method: Hurl the Earth into the Sun. Sending Earth on a collision course with the Sun is not as easy as one might think; even though you don't actually have to literally hit the Sun (send the Earth near enough to the Sun (within the Roche limit), and tidal forces will tear it apart), it's surprisingly easy to end up with Earth in a loopy elliptical orbit which merely roasts it for four months in every eight. But careful planning can avoid this.



This is impossible at our current technological level, but will be possible one day, I'm certain. In the meantime, may happen by freak accident if something comes out of nowhere and randomly knocks Earth in precisely the right direction. Earth's final resting place: a small globule of vaporized iron sinking slowly into the heart of the Sun.



Earliest feasible completion date: Via act of God: 25 years' time. Any earlier and we'd have already spotted the asteroid in question. Via human intervention: given the current level of expansion of space technology, 2250 at best.



Source: "Infinity Welcomes Careful Drivers," by Grant Naylor











0

Top 10 Emerging Environmental Technologies

environment environment - 2 years ago

10.Make Paper Obsolete






Imagine curling up on the couch with the morning paper and then using the same sheet of paper to read the latest novel by your favorite author. That's one possibility of electronic paper, a flexible display that looks very much like real paper but can be reused over and over. The display contains many tiny microcapsules filled with particles that carry electric charges bonded to a steel foil. Each microcapsule has white and black particles that are associated with either a positive or negative charge. Depending on which charge is applied; the black or white particles surface displaying different patterns. In the United States alone, more than 55 million newspapers are sold each weekday.



9.Bury The Bad Stuff






Carbon dioxide is the most prominent greenhouse gas contributing to global warming. According to the Energy Information Administration, by the year 2030 we will be emitting close to 8,000 million metric tons of CO2. Some experts say it's impossible to curb the emission of CO2 into the atmosphere and that we just have to find ways to dispose of the gas. One suggested method is to inject it into the ground before it gets a chance to reach the atmosphere. After the CO2 is separated from other emission gases, it can be buried in abandoned oil wells, saline reservoirs, and rocks. While this sounds great, scientists are not sure whether the injected gas will stay underground and what the long-term effects are, and the costs of separation and burying are still far too high to consider this technology as a practical short-term solution.



8.Let Plants and Microbes Clean Up After Us






Bioremediation uses microbes and plants to clean up contamination. Examples include the cleanup of nitrates in contaminated water with the help of microbes, and using plants to uptake arsenic from contaminated soil, in a process known as phytoremediation. The U.S. Environmental Protection Agency has used it to clean up several sites. Often, native plant species can be used for site cleanup, which are advantageous because in most cases they don't require pesticides or watering. In other cases scientists are trying to genetically modify the plants to take up contaminants in their roots and transport it all the way to the leaves for easy harvesting.



7.Plant Your Roof






It's a wonder that this concept attributed to the Hanging Gardens of Babylon, one of Seven Wonders of the World, didn't catch on sooner in the modern world. Legend has it that the roofs, balconies, and terraces of the royal palace of Babylon were turned into gardens by the king's order to cheer up one of his wives. Roof gardens help absorb heat, reduce the carbon dioxide impact by taking up Co2 and giving off oxygen, absorb storm water, and reduce summer air conditioning usage. Ultimately, the technique could lessen the "heat island" effect that occurs in urban centers. Butterflies and songbirds could also start frequenting urban garden roofs, and like the king's wife, could even cheer up the inhabitants of the building. Here, a green roof is tested at Penn State.



6.Harness Waves and Tides






The oceans cover more than 70 percent of the Earth's surface. Waves contain an abundance of energy that could be directed to turbines, which can then turn this mechanical power into electrical. The obstacle to using this energy source has been the difficulty in harnessing it. Sometimes the waves are too small to generate sufficient power. The trick is to be able to store the energy when enough mechanical power is generated. New York City's East River is now in the process of becoming the test bed for six tide-powered turbines, and Portugal's reliance on waves in a new project is expected to produce enough power for more than 1,500 homes. Here, a buoy system capable of capturing the ocean's power in the form of offshore swells is illustrated by researchers at Oregon State University.



5.Ocean Thermal Energy Conversion






The biggest solar collector on Earth is our ocean mass. According to the U.S. Department of Energy, the oceans absorb enough heat from the sun to equal the thermal energy contained in 250 billion barrels of oil each day. The U.S. consumes about 7.5 billion barrels a year. OTEC technologies convert the thermal energy contained in the oceans and turn it into electricity by using the temperature difference between the water's surface, which is heated, and the cold of the ocean's bottom. This difference in temperature can operate turbines that can drive generators. The major shortcoming of this technology is that it's still not efficient enough to be used as a major mechanism for generating power.



4.Sunny New Ideas






The sun's energy, which hits Earth in the form of photons, can be converted into electricity or heat. Solar collectorscome in many different forms and are already used successfully by energy companies and individual homeowners. The two widely known types of solar collectors are solar cells and solar thermal collectors. But researchers are pushing the limits to more efficiently convert this energy by concentrating solar power by using mirrors and parabolic dishes. Part of the challenge for employing solar power involves motivation and incentives from governments. In January, the state of California approved a comprehensive program that provides incentives toward solar development. Arizona, on the other hand, has ample sunshine but has not made solar energy a priority. In fact in some planned communities it is downright discouraged by strict rules of aesthetics.



3.The 'H' Power






Hydrogen fuel cell usage has been touted as a pollution-free alternative to using fossil fuels. They make water by combining hydrogen and oxygen. In the process, they generate electricity. The problem with fuel cells is obtaining the hydrogen. Molecules such as water and alcohol have to be processed to extract hydrogen to feed into a fuel cell. Some of these processes require the using other energy sources, which then defeat the advantages of this "clean" fuel. Most recently, scientists have come up with ways to power laptops and small devices with fuel cells, and some car companies are promising that soon we'll be seeing cars that emit nothing but clean water. The promise of a "hydrogen economy," however, is not one that all experts agree will ever be realized.



2.Remove the Salt






According to the United Nations, water supply shortages will affect billions of people by the middle of this century. Desalination, basically removing the salt and minerals out of seawater, is one way to provide potable water in parts of the world where supplies are limited. The problem with this technology is that it is expensive and uses a lot of energy. Scientists are working toward better processes where inexpensive fuels can heat and evaporate the water before running it through membranes with microscopic pores to increase efficiency.



1.Make Oil from Just about Anything






Any carbon-based waste, from turkey guts to used tires, can, by adding sufficient heat and pressure, be turned into oil through a process called thermo-depolymerization, This is very similar to how nature produces oil, but with this technology, the process is expedited by millions of years to achieve the same byproduct. Proponents of this technology claim that a ton of turkey waste can cough up about 600 pounds of petroleum.



Source:LINK